New Construction Plumbing in West Jordan, UT

Inspection-Ready New Construction Plumbing Services in West Jordan, UT

Commercial and Multifamily New Construction in West Jordan

We also plumb small commercial buildouts, offices, retail suites and multifamily projects. These jobs frequently require grease interceptors, backflow assemblies, commercial water heaters and ADA compliant fixtures. We read commercial plans, coordinate submittals and keep the general contractor updated through each inspection. Our crews scale up so plumbing never becomes the bottleneck on your project.

Residential New Construction Plumbing in West Jordan

BPK Plumbing focuses on complete plumbing system installations for new residential homes. This includes designing the layout, installing all water supply lines, drain lines, and vent piping. We work closely with homeowners and builders to ensure the plumbing system is tailored to the home's specifications and future needs, using materials like PEX and copper for supply lines and PVC for drains, chosen for durability in Utah climate.

Residential New Build Plumbing in West Jordan

For new homes, our residential new construction plumbing includes the complete installation of water supply lines, drain waste vent systems, and gas lines. We confirm proper sizing and pressure for all fixtures, from showers to kitchen sinks, while accounting for local water quality and potential foundation movement. Mineral deposits reduce the life of tankless and tank water heaters alike, so regular flushing or descaling is worth the time. Our process includes careful planning to prevent future slab leaks or drainage problems tied to the soil under your lot.

Sewer and Water Main Connections in West Jordan, UT

Connecting your new home to the municipal sewer and water mains is a critical step in new construction plumbing. BPK Plumbing handles all aspects of these connections, including excavation, trenching, pipe laying, and backfilling. We provide proper grading and sealing to prevent future leaks or blockages. Rocky ground can make sewer line and water service repairs slower, and trenchless methods are often a good fit where digging is tough.

Underground and Under-Slab Plumbing in West Jordan

The underground phase sets the drain, waste and vent layout that every fixture in the house will rely on. We trench, bed and slope PVC or ABS drain lines at a minimum quarter inch per foot and protect every pipe that passes through the slab or foundation with sleeves. Rocky ground can make sewer line and water service repairs more involved, and trenchless methods are often a good fit where digging is tough. We compact bedding carefully and avoid rigid points that could stress the pipe as the ground moves. Each line is water tested and left visible for the inspector before your concrete contractor pours.

Water Heater and Recirculation Installation in West Jordan, UT

New homes commonly use tank water heaters in the garage, basement or utility room, or tankless units on an exterior wall. We size the heater to your bathroom count and install gas or electric connections, venting, an expansion tank and drain pan where required. Many owners add a dedicated recirculation line during rough-in, which is far cheaper than retrofitting later. Mineral deposits reduce the life of tankless and tank water heaters alike, so regular flushing or descaling is worth the time. If treatment makes sense for your water, we suggest planning space for a softener or filter loop at the same time.

Final Trim and Fixture Setting in West Jordan

At trim we install toilets, faucets, garbage disposals, dishwashers, ice maker boxes and laundry connections. We work with fixtures from Moen, Delta, Kohler, American Standard and the other brands builders often choose, or with owner-supplied fixtures. Every fixture is checked for flow, drainage and leaks, and angle stops are set straight and tight. We finish by running every fixture at once to confirm the system drains and vents properly under load.

Gas Piping for New Homes in West Jordan

We size and install gas piping for ranges, water heaters, furnaces, fireplaces, pool heaters and outdoor kitchens. Black iron and CSST systems are both options, and CSST is bonded per manufacturer and code requirements. We calculate total BTU load and pipe length so every appliance gets enough pressure even when everything is running together. The system is pressure tested and inspected before the utility sets the meter.